Sony MHC-RG88 Betriebsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony MHC-RG88 herunter. Sony MHC-RG88 28 Seiten.
Seite drucken5 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Jack type A
Extend the FM lead
antenna horizontally.
AM loop antenna
Jack type B
Extend the FM lead
antenna horizontally.
AM loop antenna
6 For models with a voltage selector, set
VOLTAGE SELECTOR to the position of
your local power line voltage.
120V
220V
230-
240V
7 Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
To connect optional components
See page 22.
To attach the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Positioning the speakers
Place the front speakers at an angle of 45
degrees from your listening position. Place the
subwoofer at least 0.3m away from the main
unit.
Main Unit Subwoofer
Front
speaker
(L)
0.3m
45º
Surround
speaker
(L)
Notice for carrying this system
Do the following to protect the CD
mechanism.
1
Make sure that all discs are removed
from the unit.
2
Hold down CD and then press ?/1 until
"LOCK" appears.
3
Release ?/1 first, then release CD.
4
Unplug the AC power cord.
MHC-RG88 E2, E51 4-238-410-73 (1)
Front
speaker
(R)
Surround
speaker
(R)
GB
7