Sony SS-XGR600 Betriebsanleitung - Seite 15

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony SS-XGR600 herunter. Sony SS-XGR600 36 Seiten. Sony component hi-fi stereo system operating instructions lbt-xgr88/xgr66 lbt-xgr600

Seite drucken

Recording on a tape

manually

— Manual Recording

You can record just the portions you like from a

CD, tape or radio program on a tape. You can

also record from connected components (see

"Recording audio from a connected component"

on page 25).

Load a recordable tape into deck B.

Press FUNCTION or TUNER/BAND

repeatedly to select the desired source

to record.

Press z REC.

Deck B stands by for recording.

When you want to record on the reverse

side, press h.

Press DIRECTION repeatedly to select

g to record on one side. Select j

(or RELAY) to record on both sides.

Press X, then start playing the desired

source to record.

Recording starts.

To stop recording

Press x.

Note

You cannot listen to other sources while recording.

Tips

• When you record on both sides, be sure to start from

the front side. If you start from the reverse side,

recording stops at the end of the reverse side.

• For recording from the tape:

If you set the direction to

tapes you use have different lengths, the tapes in each

deck reverses independently.

• For recording from the radio:

If noise is heard while recording from the radio,

move the respective antenna to reduce the noise.

(or RELAY) when the

Sound Adjustment

Adjusting the sound

You can reinforce the bass and create a more

powerful sound.

Press X-GROOVE.

Each time you press the button, the display

changes as follows:

X-GROOVE ON (on)

X-GROOVE OFF (off)

Tip

Factory set to "X-GROOVE ON".

continued