Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
Release 4.0.1
Release 4.1.0
Contents
•
•
•
•
•
Prerequisites for Configuring Serial Interfaces
Before configuring serial interfaces, ensure that the following tasks and conditions are met:
•
•
•
•
OL-26061-03
Support for the following SPAs was added:
•
•
Support for the following SPAs was added:
•
•
Support for IPHC was added on the following SPAs:
•
•
•
•
Prerequisites for Configuring Serial Interfaces, page 501
You must be in a user group associated with a task group that includes the proper task IDs. If you
suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
You have installed a 2-Port or 4-Port Clear Channel T3/E3 SPA.
You should have the following SIP and any one of the following SPAs installed on the
Cisco ASR 9000 Series Router:
Cisco SIP 700 SPA Interface Processor
-
Cisco 1-Port Channelized OC-3/STM-1 SPA
-
Cisco 2-Port Channelized OC-12c/DS0 SPA
-
-
Cisco 1-Port Channelized OC-48/STM-16 SPA
-
Cisco 2-Port or 4-Port Clear Channel T3/E3 SPA
-
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
-
Your hardware must support T3/E3 or T1/E1 controllers and serial interfaces.
The following hardware supports T3/E3 controllers and serial interfaces:
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPAs
-
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA
Prerequisites for Configuring Serial Interfaces
501
Seite drucken