Cisco ASR 9000 Series 구성 매뉴얼 - 페이지 3

{카테고리_이름} Cisco ASR 9000 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 9000 Series 50 페이지. Line card
Cisco ASR 9000 Series에 대해서도 마찬가지입니다: 네트워크 설정 구성 (26 페이지), 구성 매뉴얼 (46 페이지), 매뉴얼 (24 페이지), 구성 (46 페이지), 매뉴얼 (44 페이지), 빠른 참조 매뉴얼 (7 페이지)

페이지 인쇄
Cisco ASR 9000 Series 구성 매뉴얼
Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
Release 4.0.1
Release 4.1.0
Contents
•
•
•
•
•
Prerequisites for Configuring Serial Interfaces
Before configuring serial interfaces, ensure that the following tasks and conditions are met:
•
•
•
•
OL-26061-03
Support for the following SPAs was added:
•
•
Support for the following SPAs was added:
•
•
Support for IPHC was added on the following SPAs:
•
•
•
•
Prerequisites for Configuring Serial Interfaces, page 501
You must be in a user group associated with a task group that includes the proper task IDs. If you
suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
You have installed a 2-Port or 4-Port Clear Channel T3/E3 SPA.
You should have the following SIP and any one of the following SPAs installed on the
Cisco ASR 9000 Series Router:
Cisco SIP 700 SPA Interface Processor
-
Cisco 1-Port Channelized OC-3/STM-1 SPA
-
Cisco 2-Port Channelized OC-12c/DS0 SPA
-
-
Cisco 1-Port Channelized OC-48/STM-16 SPA
-
Cisco 2-Port or 4-Port Clear Channel T3/E3 SPA
-
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
-
Your hardware must support T3/E3 or T1/E1 controllers and serial interfaces.
The following hardware supports T3/E3 controllers and serial interfaces:
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPAs
-
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
Cisco 1-Port Channelized OC-3/STM-1 SPA
Cisco 4-Port Channelized T3/DS0 SPA
Cisco 8-Port Channelized T1/E1 SPA
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPA
Prerequisites for Configuring Serial Interfaces
501