Cisco CE 2000 Platform SCE 2000 4xGBE Schnellstart-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware Cisco CE 2000 Platform SCE 2000 4xGBE herunter. Cisco CE 2000 Platform SCE 2000 4xGBE 29 Seiten. Service control engine

Seite drucken

Rack-Mounting the SCE 2000 Chassis

This chapter provides information for rack-mounting the SCE 2000 chassis.

Warning

Before you install, operate, or service the system, read the

Cisco Service Control Engines

working with the system.

SCE 2000 Mounting Brackets

There are two standard types of equipment racks, and the appropriate brackets for each are provided in the enclosed kit.

• 19" rack with front rack posts — the mounting kit includes two mounting brackets as illustrated below:

Figure 2

Mounting Brackets

• 19" rack with front and back rack posts — in addition to the mounting brackets illustrated below, the mounting kit includes

two crossrail supports that the unit slides onto.

Figure 3

Crossrail Supports

The SCE 2000 mounts to the two front rack posts with brackets that attach to the front of the SCE 2000. The inside width

between the two posts or mounting strips (left and right) must be at least 17.3 inches (44 cm).

Remember to leave a two-inch (5 cm) clearance on both sides of the SCE 2000 and at the rear for adequate airflow for

Note

the inlet and exhaust vents.

(SCE). This guide contains important safety information you should know before

Regulatory Compliance and Safety Information for the