Digitone Call Blocker Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Telefon-Zubehör Digitone Call Blocker herunter. Digitone Call Blocker 13 Seiten. Automatically blocks and routes screened calls with caller id
Auch für Digitone Call Blocker: Code List (2 seiten)

Seite drucken

Standard Caller ID Display

Automatic Caller ID Call Routing

Caller ID service from your phone company

is required for Digitone's Call Blocker to

work. The first call to your Call Blocker unit

will initialize the Clock and Date to the

current date and time. Automatic call

routing will begin to work right after the

first call when Caller ID information is

displayed.

Note that during Daylight

Savings

Time

changes,

the

phone

company is responsible for updating their

clock data when delivering the caller ID

information.

Clearing Display

To delete a single number from Call History, use the Up or Down arrow keys to select the number you

want to remove. Notice the number has dashes between the digits, Ex. 602-555-1234, Press and hold the

Block Button for 3 seconds, then see "Release Button". Release the button to clear that displayed call.

To Remove the entire Call History, if a number has dashes between the digits, wait until the dashes

are removed, Ex. 6025551234 and only the number shows, then Press and hold the Block Button for 3

seconds, you will then see "Release Button". "CID List Deleted" will then display, clearing all call history.

Viewing Call History

The left Up arrow button displays the previous calls or Top of List. The right

button Down arrow button displays the last call or End of List. When Call History starts to fill up with

calls, you can jump to the Top of List or the End of List by pressing and holding the Up arrow key to

go to the Top of List or pressing and holding the Down arrow key to go to the End of List.

Caller ID Display Buttons

The display is normally in Protected Mode, Ex. 6025555555, shown

on the display to prevent accidental number entries to a list. To add Blocked, Invited or VIP list entries,

you must use the Up or Down viewing buttons to select a displayed number which will then show the

numbers with dashes between the digits, Ex. 602-555-5555. This allows you to add a number to a list.

Blocking Callers

can be enabled using the Up or Down viewing buttons and pressing the Block

button Twice quickly on the front panel. "NBR Blocked" will display and the light indicator will flash to

show that call is now on the Blocked Call List. When a blocked caller calls in, the caller ID will display

their number and "Blocked" with the light flashing to show the call is being answered and hung up on.

Inviting Callers

can be enabled using the Up or Down viewing buttons then, press and hold the

Invite button for one second on the front panel and you will then see "Release Button". Release the

button and you see "NBR Invited". The light indicator will flash to show that call is now on the

Invited Call List. When an invited caller calls in, the caller ID will display their number and "Invited".

Inviting VIP Callers

can be enabled using the Up or Down viewing buttons and pressing the Invite

button Twice quickly on the front panel. "NBR VIP" will display and the light indicator will flash to

show that call is now on the VIP Call List. When a VIP caller calls in, the caller ID will display their

number and "VIP".