Digitone Call Blocker Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Telefon-Zubehör Digitone Call Blocker herunter. Digitone Call Blocker 13 Seiten. Automatically blocks and routes screened calls with caller id
Auch für Digitone Call Blocker: Code List (2 seiten)

Seite drucken

Viewing Caller Lists

You can review what numbers are stored in each caller list by entering programming: press and hold the

Program Button for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt

for "Enter Code" displays enter code:

Code 41

to view Blocked Caller list – use arrow buttons to view up or down. To remove an entry

press and hold the Block Button for 3 seconds on the front panel. The number will then be removed

from that list and entered back into the Invited list if code 96 # * (Global Invited List) is active.

Code 51

to view Individually Invited Caller list – use arrow buttons to view up or down. To

remove an entry press and hold the Block Button for 3 seconds on the front panel. The number will

then be removed from that list.

Code 53

to view Invited Caller in a Blocked Area Code list – use arrow buttons to view up or

down. To remove an entry press and hold the Block Button for 3 seconds on the front panel. The

number will then be removed from that list.

Code 61

to view VIP Caller list – use arrow buttons to view up or down. To remove an entry press

and hold the Block Button for 3 seconds on the front panel. The number will then be removed from

that list and entered back into the Invited list if code 96 # * (Global Invited List) is active.

To enter a specific program setting, press and hold the Program Button for 3 seconds until you see

"Program Mode", then "Pick Up Phone". When you pick up the phone connected to the TEL phone port

on the back of the Call Blocker, the display will show "Enter Code". Enter any program code listed in the

manual by simply dialing that program code with the phone's key pad to set caller lists or features.

The Call Blocker from the factory Invites every caller except No Number calls and OPX type calls which

are automatically hung up on, so you just enter those callers you want to block using either the Block

button on the front panel as the calls come in or if you already know the caller's number, you can enter it

with programming.

Creating your own Invited Caller list

If you want to block all callers and invite only specific numbers, you will use Code 97 # * to disable the

default Global Invited List and create your own invited call list using Codes 50, 52 or 60.

Programming Numbers - Invited, VIP and Blocked.

Programming Features

See