Cisco IAD2430 Series Schnellstart-Handbuch - Seite 16
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware Cisco IAD2430 Series herunter. Cisco IAD2430 Series 34 Seiten. Integrated access device
Auch für Cisco IAD2430 Series: Übersicht Handbuch (13 seiten), Übersicht (16 seiten)
Seite drucken
Figure 14
Mounting-Screw Slots for Wall-Mounting the Cisco IAD2435 IAD
1
2
1
1
Rubber feet
The following conditions must be met when you mount the router:
• Because you will use the LEDs as status and problem indicators, the LEDs on the front panel must face upward and must
be easily visible.
• The back panel must face downward to reduce strain on the cable connections.
• The power supply must rest on a horizontal surface such as the floor or a table. If the power supply is not supported, it
could place strain on the power supply cable and cause it to disconnect from the connector on the router back panel.
To wall-mount a Cisco IAD2435 IAD, follow these steps:
Step 1
Secure two screws 7 inches (17.78 centimeters) apart into a wall and 5/32 inch (0.40 centimeter) from the wall.
Hang the router on the screws as shown in Figure 15.
Step 2
Place the power supply on a horizontal surface.
Step 3
16
1
2
1
2
Mounting-screw slots