Cisco RSP7000 Installations- und Konfigurationshandbuch - Seite 41

Blättern Sie online oder laden Sie pdf Installations- und Konfigurationshandbuch für Netzwerk-Hardware Cisco RSP7000 herunter. Cisco RSP7000 48 Seiten. Upgrade kit in the cisco 7000 series routers
Auch für Cisco RSP7000: Installation von (26 seiten)

Seite drucken

Replacing a Flash Memory Card

It might become necessary for you to replace or install a Flash memory card in your RSP7000. The

RSP7000 has two PCMCIA slots: slot 0 (left) and slot 1 (right). (See Figure 9 on the following page.)

The following procedure is generic and can be used for a Flash memory card in either slot position.

A Flash memory card can be inserted and removed with the power on.

Following is the procedure for installing and removing a Flash memory card:

Step 1

Figure 9

7000 Series Route Switch Processor (RSP7000) Installation and Configuration in the Cisco 7000 Series Routers

Face the front panel of the RSP7000 (as shown in Figure 9a), and hold the Flash memory

card with the connector end of the card toward the slot.

Installing and Removing a Flash Memory Card (PCMCIA slot 1)

Reference Information