Cisco RSP7000 Manual de instalación y configuración - Página 41

Navegue en línea o descargue pdf Manual de instalación y configuración para Hardware de red Cisco RSP7000. Cisco RSP7000 48 páginas. Upgrade kit in the cisco 7000 series routers
También para Cisco RSP7000: Instalación de (26 páginas)

Imprimir página

Replacing a Flash Memory Card

It might become necessary for you to replace or install a Flash memory card in your RSP7000. The

RSP7000 has two PCMCIA slots: slot 0 (left) and slot 1 (right). (See Figure 9 on the following page.)

The following procedure is generic and can be used for a Flash memory card in either slot position.

A Flash memory card can be inserted and removed with the power on.

Following is the procedure for installing and removing a Flash memory card:

Step 1

Figure 9

7000 Series Route Switch Processor (RSP7000) Installation and Configuration in the Cisco 7000 Series Routers

Face the front panel of the RSP7000 (as shown in Figure 9a), and hold the Flash memory

card with the connector end of the card toward the slot.

Installing and Removing a Flash Memory Card (PCMCIA slot 1)

Reference Information