Monitoring Calls on a Shared Line, Shared
Extension, or Busy Lamp Field (BLF)
The line button
indicates the status.
• Unlit: Idle.
• Green (steady): Connected to a call on this phone.
• Green (flashing): Holding a call on this phone. To
resume the call, press the phone button.
• Orange (flashing): Ringing.
• Red (steady): Connected to a call on another user's
phone.
• Red (flashing): Holding a call on another user's
phone. To pick up the call, press the line button.
• Orange (steady): There is an error. Contact your
phone administrator for assistance.
Parking and Unparking Calls
• Use a star code:
– Park a call: Place the call on hold. Press
3
8
. Enter an easily remembered number
*
for your park slot. Press
#
.
– Unpark a call: Lift the handset. Press
Enter the park slot number. Press
• Use a softkey:
– Park a call: Press the right-arrow
navigation button and then press
. Enter an easily remembered number
Park
for your park slot. Then press
– Unpark a call: Press the right-arrow
navigation button, and then press
Enter the park slot number. Press
• Use a feature button (if available): Press the Park
Slot feature button
. To unpark, press the same
feature button, such as Park Slot 1, or use one of the
other techniques described in this section.
Picking Up a Call for Another User
Not available on SPA301 or SPA501G
• Enter an extension number: Press
the extension number. Press
Dial
• Use a feature button (if available): Press the
feature button
, which displays the user's name.
Picking Up a Call from a List of Ringing Calls
Not available on SPA301 or SPA501G
• Use a softkey: Press the right-arrow navigation
button, and then press
GrPick
(Group Pickup). Use the navigation button to choose
a call, and then press
.
Dial
• Use a feature button (if available): Press
the Group Pickup feature button
the navigation button to choose a call, and
then press
.
Dial
Diverting Calls to Voicemail
• Ignore a ringing call: Press
forwarded to your Call Forward No Answer number
(usually voicemail).
• Prevent new calls from ringing your phone: Press
Dnd
your Call Forward No Answer number (usually
voicemail). To clear, press
(Clear Do Not Disturb).
Forwarding Calls to Another Number
• Forward all incoming calls: Press
Cfwd
calls. Then enter an extension or phone number.
Press
extension).
• Cancel Call Forward All: Press
Clr Fwd
Using the Site Directory
3
9
.
*
To find extension numbers for users, groups, and
#
.
system features, press
Use the navigation button to choose a
directory. To place a call, select a number, and
then press
Using Feature Buttons
#
or
.
Dial
Your phone administrator may configure feature
buttons for your phone. Ask your phone
Unpark
.
administrator for details. Not available on
or
.
SPA301, SPA501G, or SPA502G
#
Dial
• Auto-dial (system speed dial): Immediately calls or
transfers a call to the specified extension or phone
number. The transfer is non-consultative.
• BLF (Busy Lamp Field): Monitors the specified
extension. Can be used to pick up a ringing call, to
immediately call the target, or to transfer a call to the
target. The transfer is non-consultative.
. Enter
Pickup
• Block Caller ID: Blocks your caller ID for a new call.
.
Lasts for the duration of the call.
• Park Slot: Places a call on hold in the specified park
slot, such as Park Slot 2. To unpark, press the same
park slot button on any IP phone.
• Force Night: The function depends on the Day/
Night settings for your phone system.
– In a manual day/night system: Press to toggle
or
Grpickup
between Day mode (green) and Night mode (red).
– In an automated day/night system: Press to
temporarily override the schedule by enabling
Night mode (red). Press again to resume the
. Use
normal schedule (green).
. The call is
Ignore
(Do Not Disturb). All calls are forwarded to
or
-Dnd
Clr Dnd
Forward
(Call Forward) to forward all incoming
(not required if you entered an
Dial
or
-Cfwd
(Clear Forward).
or
.
Dir
Directory
.
Dial
• Intercom: Initiates a two-way call to the phone
speaker of the specified user. To end the intercom
call, press the button again.
• Individual Pickup: Flashes to indicate a ringing call
on the specified extension. Press to pick up the call.
• Group Pickup: Flashes to indicate a ringing
call on any extension. Press to display a list of
ringing calls. Use the navigation button to
choose a call, and then press
Creating a Personal Speed Dial Button
If there is an unused feature button
you can add a personal speed dial.
or
1. Press and hold the unused button for 3 to 4
seconds.
2. To enter the Name, repeatedly press the
corresponding key on the keypad until the
desired letter appears. To erase a character,
press
delChar
arrow navigation button.
3. In the PhoneNo field, enter an extension or phone
number, including any required outside line digit,
such as 9. Finally, press
Using Star Codes
• Enter a code manually (all models): Lift the
handset. Press
*
details, see your phone user guide (links in the
Where to Go from Here section).
• Select a star code on Cisco SPA50xG
models (except SPA501G): Lift the handset.
Press the right-arrow navigation button
twice. Press
*code
arrow navigation button to select a star code.
Press
. Additional prompts may appear.
Dial
• Select a star code on Cisco SPA525G/G2:
Lift the handset. Press Option, and then
select Input Star Code. Press the down-
arrow navigation button to select a star code.
Press
. Additional prompts may
Select
appear.
Where to Go from Here
• Cisco Small Business Support Community:
www.cisco.com/go/smallbizsupport
• Additional Phone Documentation:
www.cisco.com/go/uc300 (see the Resources
tab)
.
Dial
on your phone,
. When finished, press the down-
.
Save
, followed by the code. For
. Press the down-
Seite drucken