Cisco SPA525G - Small Business Pro IP Phone VoIP Benutzerhandbuch

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Netzwerk-Hardware Cisco SPA525G - Small Business Pro IP Phone VoIP herunter. Cisco SPA525G - Small Business Pro IP Phone VoIP 2 Seiten. Vpn status
Auch für Cisco SPA525G - Small Business Pro IP Phone VoIP: Benutzerhandbuch (18 seiten), Schnellstart-Handbuch (2 seiten), Einrichtung und Benutzerhandbuch (19 seiten), Benutzerhandbuch (22 seiten), Kurzreferenz-Handbuch (4 seiten), Schnellstart-Handbuch (14 seiten), Schnellstart-Handbuch (5 seiten), Handbuch (9 seiten), Anweisungen (4 seiten), Schnellstart-Handbuch (5 seiten), Schnellreferenzkarte (2 seiten), Schnellstart-Handbuch (8 seiten), Kurzreferenz-Handbuch (4 seiten), Schnellstart-Handbuch (3 seiten), Schnellstart-Handbuch (3 seiten), Schnellstart-Handbuch (3 seiten), Schnellstart-Handbuch (4 seiten), Handbuch (3 seiten), Handbuch (3 seiten), Benutzerhandbuch (7 seiten), Verwendung von (2 seiten), Anweisungen (4 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (50 seiten)

Seite drucken
Cisco SPA525G - Small Business Pro IP Phone VoIP Benutzerhandbuch
The Cisco SPA 525G includes on demand integrated call recording capabilities using a built-in USB port.
The client can choose to:
• Use an existing USB 2.0 or 3.0 compatible jump drive
• Purchase a 16G USB jump drive from POPP (stores up to 500 hours of audio as .wav files.)
Enable Call Recording feature in Cisco SPA 525G telephone
•
Press the [Menu] button
•
Press the [Down] arrow button until [User Preferences] is selected and then press the [Select] softkey
•
Press the [Down] arrow button until [Call Record Configuration] is selected and then press the [Select] softkey
•
With [Record Audio Mode] selected, press the [Right] arrow button to display a blue check mark, indicating that the
feature is enabled.
•
Press the [Down] arrow button until [Record Beep Reminder] is selected.
•
The [Record Beep Reminder] is enabled by default. When this enabled, both you and the other party will hear two
beeps indicating that call recording has begun. To disable this feature, press the [Right] arrow button to display a red
dash, indicating that the feature is disabled.
•
Press the [Save] softkey
•
Press the [Menu] button
• Plug a USB 2.0 or 3.0 compatible jump drive into the USB port located on top of the telephone above the Cisco logo.
Note: Make sure there is sufficient storage available on the USB jump drive to store calls. A five minute call is equal to
about 2.5M of storage.
Record a Phone Call in Progress
Call Recording is available on a per call basis. You must start and stop the recording of each call.
• To start recording:
o Once an incoming or outgoing call is answered, press the [Right] arrow button once
o
Press the [RecNow] softkey to begin recording. If the Record Beep Reminder feature is enabled,
the other party will hear two beeps indicating that call recording has begun.
• To stop recording:
o During a call, press the [Right] arrow button once
o Press the [StopRec] softkey to stop recording
Note: Call recording stops automatically when you hang up or when a call is transferred to another phone
© POPP.com, Inc. All rights reserved.
Cisco SPA 525G On-Demand Call Recording User Guide
to exit
For service, call 763-797-7900 or visit www.popp.com
Cloud IP Phone System
both you and
Page 1 of 2
4/4/19