Cisco SPA525G - Small Business Pro IP Phone VoIP Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Jaringan Cisco SPA525G - Small Business Pro IP Phone VoIP. Cisco SPA525G - Small Business Pro IP Phone VoIP 2 halaman. Vpn status
Juga untuk Cisco SPA525G - Small Business Pro IP Phone VoIP: Panduan Pengguna (18 halaman), Panduan Memulai Cepat (2 halaman), Pengaturan dan Panduan Pengguna (19 halaman), Panduan Pengguna (22 halaman), Panduan Referensi Cepat (4 halaman), Panduan Memulai Cepat (14 halaman), Panduan Memulai Cepat (5 halaman), Manual (9 halaman), Petunjuk (4 halaman), Panduan Memulai Cepat (5 halaman), Kartu Referensi Cepat (2 halaman), Panduan Memulai Cepat (8 halaman), Panduan Referensi Cepat (4 halaman), Panduan Memulai Cepat (3 halaman), Panduan Memulai Cepat (3 halaman), Panduan Memulai Cepat (3 halaman), Panduan Memulai Cepat (4 halaman), Manual (3 halaman), Manual (3 halaman), Panduan Pengguna (7 halaman), Menggunakan (2 halaman), Petunjuk (4 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (50 halaman)

Halaman Cetak
Cisco SPA525G - Small Business Pro IP Phone VoIP Panduan Pengguna
The Cisco SPA 525G includes on demand integrated call recording capabilities using a built-in USB port.
The client can choose to:
• Use an existing USB 2.0 or 3.0 compatible jump drive
• Purchase a 16G USB jump drive from POPP (stores up to 500 hours of audio as .wav files.)
Enable Call Recording feature in Cisco SPA 525G telephone
•
Press the [Menu] button
•
Press the [Down] arrow button until [User Preferences] is selected and then press the [Select] softkey
•
Press the [Down] arrow button until [Call Record Configuration] is selected and then press the [Select] softkey
•
With [Record Audio Mode] selected, press the [Right] arrow button to display a blue check mark, indicating that the
feature is enabled.
•
Press the [Down] arrow button until [Record Beep Reminder] is selected.
•
The [Record Beep Reminder] is enabled by default. When this enabled, both you and the other party will hear two
beeps indicating that call recording has begun. To disable this feature, press the [Right] arrow button to display a red
dash, indicating that the feature is disabled.
•
Press the [Save] softkey
•
Press the [Menu] button
• Plug a USB 2.0 or 3.0 compatible jump drive into the USB port located on top of the telephone above the Cisco logo.
Note: Make sure there is sufficient storage available on the USB jump drive to store calls. A five minute call is equal to
about 2.5M of storage.
Record a Phone Call in Progress
Call Recording is available on a per call basis. You must start and stop the recording of each call.
• To start recording:
o Once an incoming or outgoing call is answered, press the [Right] arrow button once
o
Press the [RecNow] softkey to begin recording. If the Record Beep Reminder feature is enabled,
the other party will hear two beeps indicating that call recording has begun.
• To stop recording:
o During a call, press the [Right] arrow button once
o Press the [StopRec] softkey to stop recording
Note: Call recording stops automatically when you hang up or when a call is transferred to another phone
© POPP.com, Inc. All rights reserved.
Cisco SPA 525G On-Demand Call Recording User Guide
to exit
For service, call 763-797-7900 or visit www.popp.com
Cloud IP Phone System
both you and
Page 1 of 2
4/4/19