Cisco UCS B200 M3 Upgrade-Handbuch - Seite 18

Blättern Sie online oder laden Sie pdf Upgrade-Handbuch für Netzwerk-Hardware Cisco UCS B200 M3 herunter. Cisco UCS B200 M3 21 Seiten. Blade server
Auch für Cisco UCS B200 M3: Installationshandbuch (34 seiten), Installations- und Wartungshinweise (36 seiten), Installations- und Wartungshinweise (37 seiten), Handbuch (8 seiten), Installations- und Wartungshinweise (28 seiten)

Seite drucken
Cisco UCS B200 M3 Upgrade-Handbuch
Cisco UCS Blade Server
Clear the WILL_BOOT_FAULT
Step 8
a.
b.
c.
d.
e.
Note
Step 9
Optional: Downgrade your server CIMC.
Use the GUI or CLI procedures in the
Optional: Downgrade your server BIOS.
Step 10
Use the GUI or CLI procedures in the
Sample Board Controller Activation Command Sequence
The following is an example of the commands with sample values.
Box-A# scope server 1/4
Box-A /chassis/server # scope boardcontroller
Box-A /chassis/server/boardcontroller # show image
Name
--------------------------------------------- -------------------- -------
ucs-b22-m3-brdprog.3.0.gbin
ucs-b22-m3-brdprog.8.0.gbin
Box-A /chassis/server/boardcontroller # activate firmware 8.0 force
Warning: When committed this command will reset the end-point
Box-A /chassis/server/boardcontroller* # commit-buffer
The server automatically reboots after the
Note
Box-A /chassis/server/boardcontroller # show version
BoardController:
Cisco UCS B-Series Servers Upgrade Guide for Intel E5-2600/E5 2400 v2 Series CPUs
18
Running-Vers: 8.0
Package-Vers:
Activate-Status: Ready
In the Navigation pane, click the Equipment tab.
On the Equipment tab, expand Equipment > Chassis > Chassis number > Servers, then choose
your server.
In the Work pane, click the General tab.
In the Actions area, click Recover Server.
In the Recover Server dialog, click Reset CIMC (Server Controller), then click OK.
Wait for CIMC to reboot and for Cisco UCS Manager to do a shallow discovery of the server. This
takes two to three minutes. At the end of this process the WILL_BOOT_FAULT is cleared.
The Cisco UCS Manager 2.2(2c) bundle, including the server CIMC and BIOS, is
backward-compatible with earlier supported CPUs, so the following firmware downgrade steps
are optional.
Running-Vers: 8.0
Package-Vers:
Activate-Status: Activating
using the Cisco UCS Manager GUI to reset the server CIMC:
by
UCS Manager Install and Upgrade Guides.
UCS Manager Install and Upgrade Guides.
Type
Board Controller
Board Controller 8.0
command is executed.
commit-buffer
Version
3.0
OL-28629-02