Epson 2480 - Perfection Photo Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Scanner Epson 2480 - Perfection Photo herunter. Epson 2480 - Perfection Photo 8 Seiten. Scanning application force quits on mac os 10.4
Auch für Epson 2480 - Perfection Photo: Produktinformation Handbuch (6 seiten), Produkt-Support-Bulletin (1 seiten), Handbuch aktualisieren (2 seiten), Wichtige Sicherheitshinweise (4 seiten), Setup-Handbuch (4 seiten), Produkt-Support-Bulletin (23 seiten), Handbuch (11 seiten), Update (1 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (24 seiten), Produkt-Support-Bulletin (29 seiten), Produkt-Support-Bulletin (8 seiten), Produkt-Support-Bulletin (3 seiten), Produkt-Support-Bulletin (14 seiten), Produkt-Support-Bulletin (12 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (11 seiten), Produkt-Support-Bulletin (40 seiten), Produkt-Support-Bulletin (22 seiten), Produkt-Support-Bulletin (12 seiten), Produkt-Support-Bulletin (21 seiten)

If you're using Mac

double-click the Epson icon.

If you're using Mac OS 9.x, double-click the Epson icon.

Click Continue, then read the license agreement and click Agree.

At the Software Installation screen, click Install. Enter your Macintosh

Administrator name and password as necessary during installation.

Follow the on-screen instructions to install each program. Click Next or

Finish (Windows) or Install or Quit (Macintosh) as needed. Note that

Epson Smart Panel™ installs in several steps.

Note: If you're installing on Macintosh OS 9.x, you may see a prompt to

update your Carbon Library. After installing it and restarting your system,

double-click the Epson icon, then click Install to continue.

At the end of the installation, click Exit.

At the Product Registration screen, register your scanner as instructed.

Connect the Scanner

After your software is installed, it's time to connect your scanner.

Remove the sticker wrapped

around the front of the scanner

covering the transportation lock

on the bottom.

Caution: Don't turn the scanner

over to access the lock or you

may damage the scanner.

Slide the transportation lock

to the unlock position.

Remove the yellow sticker.

Connect the cable for the built-in transparency unit (scanner cover).

Plug the square end of the USB cable into the scanner's USB port. Then

plug the flat end into any available USB port on your computer or hub.

Note: Your scanner may not work correctly if you use a USB cable other

than the one supplied by Epson or connect it through more than one hub.

OS X, double-click the Mac OS X folder, then

Click Install

Remove

sticker