Epson 2480 - Perfection Photo Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Skaner Epson 2480 - Perfection Photo. Epson 2480 - Perfection Photo 8 stron. Scanning application force quits on mac os 10.4
Również dla Epson 2480 - Perfection Photo: Podręcznik z informacjami o produkcie (6 strony), Biuletyn wsparcia produktu (1 strony), Aktualizacja instrukcji (2 strony), Ważne instrukcje bezpieczeństwa (4 strony), Instrukcja konfiguracji (4 strony), Biuletyn wsparcia produktu (23 strony), Podręcznik (11 strony), Aktualizacja (1 strony), Biuletyn wsparcia produktu (40 strony), Biuletyn wsparcia produktu (24 strony), Biuletyn wsparcia produktu (29 strony), Biuletyn wsparcia produktu (8 strony), Biuletyn wsparcia produktu (3 strony), Biuletyn wsparcia produktu (14 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (40 strony), Biuletyn wsparcia produktu (11 strony), Biuletyn wsparcia produktu (40 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (21 strony)

Drukuj stronę
Epson 2480 - Perfection Photo Skrócona instrukcja obsługi
2
If you're using Mac
double-click the Epson icon.
If you're using Mac OS 9.x, double-click the Epson icon.
3
Click Continue, then read the license agreement and click Agree.
4
At the Software Installation screen, click Install. Enter your Macintosh
Administrator name and password as necessary during installation.
5
Follow the on-screen instructions to install each program. Click Next or
Finish (Windows) or Install or Quit (Macintosh) as needed. Note that
Epson Smart Panel™ installs in several steps.
Note: If you're installing on Macintosh OS 9.x, you may see a prompt to
update your Carbon Library. After installing it and restarting your system,
double-click the Epson icon, then click Install to continue.
6
At the end of the installation, click Exit.
7
At the Product Registration screen, register your scanner as instructed.

Connect the Scanner

After your software is installed, it's time to connect your scanner.
1
Remove the sticker wrapped
around the front of the scanner
covering the transportation lock
on the bottom.
Caution: Don't turn the scanner
over to access the lock or you
may damage the scanner.
2
Slide the transportation lock
to the unlock position.
3
Remove the yellow sticker.
4
Connect the cable for the built-in transparency unit (scanner cover).
5
Plug the square end of the USB cable into the scanner's USB port. Then
plug the flat end into any available USB port on your computer or hub.
Note: Your scanner may not work correctly if you use a USB cable other
than the one supplied by Epson or connect it through more than one hub.
®
OS X, double-click the Mac OS X folder, then
Click Install
Remove
sticker