Cisco 2500 Series Handbuch "Erste Schritte - Seite 19

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Server Cisco 2500 Series herunter. Cisco 2500 Series 47 Seiten. Wireless controller
Auch für Cisco 2500 Series: Handbuch zur Installation (12 seiten), Konfigurationshandbuch (19 seiten), Handbuch für den Einsatz (23 seiten), Konfigurationshandbuch (50 seiten)

Start the PC terminal emulation program.

Step 2

Configure the terminal emulation program for the following parameters:

Step 3

•

Securing the Power Adapter Cable

To secure the power adapter cable to the 2504 controller, use the plastic relief clip shipped with the cable.

The clip relieves the cable in the event it falls and prevents the connector from being sheared off at the

plug pins.

Caution

If the relief clip is not installed, the power connector can be damaged if the power cable is pulled or if

the power adapter falls.

Note

The Cisco 2106 power adapter is not compatible with a 2504 controller.

To secure the power adapter cable and plug, follow these steps:

Wrap the power adapter cable through the plastic security clip as shown in

Step 1

Figure 11

Fasten the security clip with a screw to the existing hole on the back panel on the 2504 controller (see

Step 2

Figure

9600 baud

8 data bits

No flow control

1 stop bit

No parity

Plastic Relief Clip

12).

Cisco 2500 Series Wireless Controller Getting Started Guide

Installing the Controller

Figure

11.