Cisco 2500 Series Başlangıç Kılavuzu - Sayfa 19

Sunucu Cisco 2500 Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Cisco 2500 Series 47 sayfaları. Wireless controller
Ayrıca Cisco 2500 Series için: Kurulum Kılavuzu (12 sayfalar), Yapılandırma Kılavuzu (19 sayfalar), Dağıtım Kılavuzu (23 sayfalar), Yapılandırma Kılavuzu (50 sayfalar)

Cisco 2500 Series Başlangıç Kılavuzu
Start the PC terminal emulation program.
Step 2
Configure the terminal emulation program for the following parameters:
Step 3
Securing the Power Adapter Cable
To secure the power adapter cable to the 2504 controller, use the plastic relief clip shipped with the cable.
The clip relieves the cable in the event it falls and prevents the connector from being sheared off at the
plug pins.
Caution
If the relief clip is not installed, the power connector can be damaged if the power cable is pulled or if
the power adapter falls.
Note
The Cisco 2106 power adapter is not compatible with a 2504 controller.
To secure the power adapter cable and plug, follow these steps:
Wrap the power adapter cable through the plastic security clip as shown in
Step 1
Figure 11
Fasten the security clip with a screw to the existing hole on the back panel on the 2504 controller (see
Step 2
Figure
9600 baud
8 data bits
No flow control
1 stop bit
No parity
Plastic Relief Clip
12).
Cisco 2500 Series Wireless Controller Getting Started Guide
Installing the Controller
Figure
11.
19