Cisco APIC L4 Installations- und Wartungshandbuch - Seite 35

Blättern Sie online oder laden Sie pdf Installations- und Wartungshandbuch für Server Cisco APIC L4 herunter. Cisco APIC L4 46 Seiten.

Installing the Server

Set the NIC mode to Dedicated, when setting up the CIMC, in the CIMC Configuration Utility. After the

CIMC in configured, in the CIMC GUI, verify that you have the following parameters set.

Updating the BIOS and Cisco IMC Firmware

Caution

The server uses firmware obtained from and certified by Cisco. Cisco provides release notes with each firmware

image. There are several possible methods for updating the firmware:

• Recommended method for firmware update: Use the Cisco Host Upgrade Utility to simultaneously

• You can upgrade the Cisco IMC and BIOS firmware by using the Cisco IMC GUI interface.

• You can upgrade the Cisco IMC and BIOS firmware by using the Cisco IMC CLI interface.

Step 1

Enter the BIOS Setup Utility by pressing the F2 key when prompted during bootup.

The version and build of the current BIOS are displayed on the Main page of the utility.

Note

Step 2

Use the arrow keys to select the BIOS menu page.

Step 3

Highlight the field to be modified by using the arrow keys.

Step 4

Press Enter to select the field that you want to change, and then modify the value in the field.

Step 5

Press the right arrow key until the Exit menu screen is displayed.

Parameters

LLDP

TPM Support

TPM Enabled Status

Ownership

When you upgrade the BIOS firmware, you must also upgrade the Cisco IMC firmware to the same

version or the server does not boot. Do not power off the server until the BIOS and Cisco IMC firmware

are matching or the server does not boot.

Cisco provides the Cisco Host Upgrade Utility to assist with simultaneously upgrading the BIOS, Cisco

IMC, and other firmware to compatible levels.

upgrade the Cisco IMC, BIOS, and component firmware to compatible levels.

For the latest firmware release, see the

Updating the BIOS and Cisco IMC Firmware

Disabled on the VIC

Enabled on the BIOS

Cisco Host Upgrade Utility Quick Reference

Cisco APIC M4/L4 Server Installation and Service Guide

Settings

Enabled

Owned

Guide.