Cisco UCS 5100 Konfigurationshandbuch

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Server Cisco UCS 5100 herunter. Cisco UCS 5100 6 Seiten. Uplink ethernet connection
Auch für Cisco UCS 5100: Einrichtung (4 seiten), Einrichtung (17 seiten), Firmware-Handbuch (10 seiten), Konfiguration (5 seiten), Handbuch (14 seiten), Upgrade-Anweisungen (10 seiten), Schnellstart-Handbuch (8 seiten)

UCS Uplink Ethernet Connection Configuration

Example

Document ID: 110267

Contents

Introduction

Prerequisites

Requirements

Components Used

Conventions

Configure

Network Diagram

1. Configure Uplink Ethernet Ports

2. Unconfigure an Uplink Ethernet Port

Verify

Troubleshoot

Related Information

Introduction

Each Cisco Unified Computing System (UCS) provides ports that can be configured as either Server Ports or

Uplink Ports. Ports are not reserved for specific use. They must be configured. You can add expansion

modules to increase the number of Uplink Ports on the Fabric Interconnect.

Create LAN and SAN Pin Groups in order to pin traffic from servers to a specific Uplink Port.

Prerequisites

Requirements

Cisco recommends that you have a working knowledge of UCS software and hardware before you attempt

this task.

Components Used

The information in this document is based on Cisco UCS.

The information in this document was created from devices in a specific lab environment. All of the devices

used in this document started with a default configuration. If your network is live, make sure that you

understand the potential impact of any command.

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Configure

Cisco UCS Fabric Interconnects provide these port types: