Cisco UCS B200 M4 Installations- und Wartungshinweise - Seite 2
Blättern Sie online oder laden Sie pdf Installations- und Wartungshinweise für Server Cisco UCS B200 M4 herunter. Cisco UCS B200 M4 30 Seiten. For e5-2600 v4 series cpus
Auch für Cisco UCS B200 M4: Installations- und Wartungshinweise (46 seiten), Upgrade-Handbuch (9 seiten), Wartungshandbuch (24 seiten)
Seite drucken
Revised: October 7, 2014,
Cisco UCS B200 M4 Blade Server
The Cisco UCS B200 M4 is a density-optimized, half-width blade server that supports two CPU sockets for Intel E5-2600 v3 series
CPUs and up to 24 DDR4 DIMMs. It supports one modular LOM (dedicated slot for Cisco's Virtual Interface Card) and one mezzanine
adapter. In addition, the UCS B200 M4 supports an optional storage module that supports up to 2 SAS or SATA hard drives or solid
state disks (SSDs) . You can install up to eight UCS B200 blade servers in a UCS chassis, mixing with other models or Cisco UCS
blade servers in the chassis if desired.
The UCS B200 M3 blade server is still available and is documented in separately.
Figure 1: Cisco UCS B200 M4 Front Panel
1
Asset pull tag
Each server has a blank plastic tag that pulls out
of the front panel which is provided so that you
can add your own asset tracking label without
interfering with the intended air flow.
3
Ejector captive screw
5
Hard drive bay 2
7
Network link status LED
Local console connector
9
11
Locator button and LED
LEDs
Server LEDs indicate whether the blade server is in active or standby mode, the status of the network link, the overall health of the
blade server, and whether the server is set to give a flashing blue beaconing indication.
The removable drives also have LEDs indicating hard disk access activity and disk health.
2
2
Blade ejector handle
4
Hard drive bay 1
6
Power button and LED
8
Blade health LED
Reset button access
10