Cisco UCS B200 M4 Вказівки щодо встановлення та обслуговування - Сторінка 2

Переглянути онлайн або завантажити pdf Вказівки щодо встановлення та обслуговування для Сервер Cisco UCS B200 M4. Cisco UCS B200 M4 30 сторінок. For e5-2600 v4 series cpus
Також для Cisco UCS B200 M4: Вказівки щодо встановлення та обслуговування (46 сторінок), Посібник з оновлення (9 сторінок), Посібник з обслуговування (24 сторінок)

Revised: October 7, 2014,

Cisco UCS B200 M4 Blade Server

The Cisco UCS B200 M4 is a density-optimized, half-width blade server that supports two CPU sockets for Intel E5-2600 v3 series

CPUs and up to 24 DDR4 DIMMs. It supports one modular LOM (dedicated slot for Cisco's Virtual Interface Card) and one mezzanine

adapter. In addition, the UCS B200 M4 supports an optional storage module that supports up to 2 SAS or SATA hard drives or solid

state disks (SSDs) . You can install up to eight UCS B200 blade servers in a UCS chassis, mixing with other models or Cisco UCS

blade servers in the chassis if desired.

The UCS B200 M3 blade server is still available and is documented in separately.

Figure 1: Cisco UCS B200 M4 Front Panel

Asset pull tag

Each server has a blank plastic tag that pulls out

of the front panel which is provided so that you

can add your own asset tracking label without

interfering with the intended air flow.

Ejector captive screw

Hard drive bay 2

Network link status LED

Local console connector

Locator button and LED

Server LEDs indicate whether the blade server is in active or standby mode, the status of the network link, the overall health of the

blade server, and whether the server is set to give a flashing blue beaconing indication.

The removable drives also have LEDs indicating hard disk access activity and disk health.

Blade ejector handle

Hard drive bay 1

Power button and LED

Blade health LED

Reset button access