Cisco 2600 Series Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Gateway Cisco 2600 Series herunter. Cisco 2600 Series 12 Seiten. Configuring adsl wic to support pppoe clients
Auch für Cisco 2600 Series: Anmerkungen zur Veröffentlichung (32 seiten), Konfiguration (15 seiten), Anwendungshinweis (41 seiten), Datenblatt (6 seiten), Anhang (15 seiten), Installationshandbuch (22 seiten), Übersicht (13 seiten), Schnellstart-Handbuch (2 seiten), Handbuch (5 seiten)

Figure 1

To install the Cisco RPS adapter plate, you will also need the following tools and equipment (which

are not included):

•

Cisco 2600 series router

•

Medium-size Phillips screwdriver

•

ESD-preventive wrist strap

•

Antistatic bag (optional)

•

Wire cutters or scissors for cutting the cable tie-wraps (optional)

Removing the Cover

You must remove the chassis cover to access the internal power supply.

Warning

with a power switch, line voltages are present within the power supply even when the

power switch is OFF and the power cord is connected. For systems without a power

switch, line voltages are present within the power supply when the power cord is

connected.

Warning

removed from the DC circuit. To ensure that all power is OFF, locate the circuit breaker

on the panel board that services the DC circuit, switch the circuit breaker to the OFF

position, and tape the switch handle of the circuit breaker in the OFF position.

Cisco RPS Adapter Plate for Cisco 2600 series Routers

Adapter plate

Do not touch the power supply when the power cord is connected. For systems

Before performing any of the following procedures, ensure that power is

Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers

Removing the Cover