Cisco 2600 Series Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Porta de entrada Cisco 2600 Series. Cisco 2600 Series 12 páginas. Configuring adsl wic to support pppoe clients
Também para Cisco 2600 Series: Notas de lançamento (32 páginas), Configuração (15 páginas), Nota de aplicação (41 páginas), Ficha de dados (6 páginas), Apêndice (15 páginas), Manual de instalação (22 páginas), Visão geral (13 páginas), Manual de início rápido (2 páginas), Manual (5 páginas)

Figure 1

To install the Cisco RPS adapter plate, you will also need the following tools and equipment (which

are not included):

•

Cisco 2600 series router

•

Medium-size Phillips screwdriver

•

ESD-preventive wrist strap

•

Antistatic bag (optional)

•

Wire cutters or scissors for cutting the cable tie-wraps (optional)

Removing the Cover

You must remove the chassis cover to access the internal power supply.

Warning

with a power switch, line voltages are present within the power supply even when the

power switch is OFF and the power cord is connected. For systems without a power

switch, line voltages are present within the power supply when the power cord is

connected.

Warning

removed from the DC circuit. To ensure that all power is OFF, locate the circuit breaker

on the panel board that services the DC circuit, switch the circuit breaker to the OFF

position, and tape the switch handle of the circuit breaker in the OFF position.

Cisco RPS Adapter Plate for Cisco 2600 series Routers

Adapter plate

Do not touch the power supply when the power cord is connected. For systems

Before performing any of the following procedures, ensure that power is

Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers

Removing the Cover