Cisco 2621 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gateway Cisco 2621 herunter. Cisco 2621 35 Seiten. Gateway-pbx interoperability: lucent/avaya definity g3si with e1 pri net5 signaling
Auch für Cisco 2621: Betrieb (25 seiten), Benutzerhandbuch (20 seiten)
Seite drucken
scalable, secure, manageable remote access server that meets FIPS 140-1 Level 2 requirements. This
section describes the general features and functionality provided by the Cisco 2621 router. Section 3
provides further details on how the router addresses FIPS 140-1 requirements.
The 2621 Cryptographic Module
The metal casing that fully encloses the module establishes the cryptographic boundary for the router,
all the functionality discussed in this document is provided by components within the casing. Cisco IOS
features such as tunneling, data encryption, and termination of Remote Access WANs via IPSec, Layer
2 Forwarding (L2F) and Layer 2 Tunneling Protocols (L2TP) make the Cisco 2600 an ideal platform for
building virtual private networks or outsourced dial solutions. Cisco 2600`s RISC-based processor
provides the power needed for the dynamic requirements of the remote branch office, achieving wire
speed Ethernet to Ethernet routing with up to 25 thousand packets per second (Kpps) throughput
capacity.
Figure 1
Figure 1
Module Interfaces
The interfaces for the router are located on the rear panel as shown in
Figure 2
Cisco 2621
The Cisco 2600 series features single or dual fixed LAN interfaces, a network module slot, two Cisco
WAN interface card (WIC) slots, and a new Advanced Integration Module (AIM) slot. LAN support
includes single and dual Ethernet options; 10/100 Mbps auto-sensing Ethernet; mixed Token-Ring and
Ethernet; and single Token Ring chassis versions. WAN interface cards support a variety of serial, ISDN
78-13824-01
shows a Cisco 2621 modular access router.
Cisco 2621 Router
RPS
ACTIVITY
Physical Interfaces
SERIAL 1
SERIAL 0
CONN
WIC
CONN
2A/S
SEE MANUAL BEFORE INSTALLATION
W1
LINK
ETHERNET 1
ACT
10/100BaseT
Ethernet 0/1
10/100BaseT
(RJ-45)
Ethernet 0/0
(RJ-45)
SERIAL 1
Cisco 2611
100-240V– 1A
50/60 Hz 47 W
SERIAL 0
CONN
WIC
CONN
2T
SEE MANUAL BEFORE INSTALLATION
W0
LINK
ETHERNET 0 ACT
CONSOLE
AUX
Auxiliary
port (RJ-45)
Console
port (RJ-45)
Cisco 2621 Modular Access Router Security Policy
Cisco 2621 Modular Access Routers
Cisco 2600
SERIES
Figure
2.
3