Cisco 2621 Kullanıcı Kılavuzu - Sayfa 3

Ağ Geçidi Cisco 2621 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco 2621 35 sayfaları. Gateway-pbx interoperability: lucent/avaya definity g3si with e1 pri net5 signaling
Ayrıca Cisco 2621 için: Operasyonlar (25 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

scalable, secure, manageable remote access server that meets FIPS 140-1 Level 2 requirements. This

section describes the general features and functionality provided by the Cisco 2621 router. Section 3

provides further details on how the router addresses FIPS 140-1 requirements.

The 2621 Cryptographic Module

The metal casing that fully encloses the module establishes the cryptographic boundary for the router,

all the functionality discussed in this document is provided by components within the casing. Cisco IOS

features such as tunneling, data encryption, and termination of Remote Access WANs via IPSec, Layer

2 Forwarding (L2F) and Layer 2 Tunneling Protocols (L2TP) make the Cisco 2600 an ideal platform for

building virtual private networks or outsourced dial solutions. Cisco 2600`s RISC-based processor

provides the power needed for the dynamic requirements of the remote branch office, achieving wire

speed Ethernet to Ethernet routing with up to 25 thousand packets per second (Kpps) throughput

capacity.

Figure 1

Module Interfaces

The interfaces for the router are located on the rear panel as shown in

Figure 2

Cisco 2621

The Cisco 2600 series features single or dual fixed LAN interfaces, a network module slot, two Cisco

WAN interface card (WIC) slots, and a new Advanced Integration Module (AIM) slot. LAN support

includes single and dual Ethernet options; 10/100 Mbps auto-sensing Ethernet; mixed Token-Ring and

Ethernet; and single Token Ring chassis versions. WAN interface cards support a variety of serial, ISDN

78-13824-01

shows a Cisco 2621 modular access router.

Cisco 2621 Router

RPS

ACTIVITY

Physical Interfaces

SERIAL 1

SERIAL 0

CONN

WIC

CONN

2A/S

SEE MANUAL BEFORE INSTALLATION

LINK

ETHERNET 1

ACT

10/100BaseT

Ethernet 0/1

10/100BaseT

(RJ-45)

Ethernet 0/0

(RJ-45)

SERIAL 1

Cisco 2611

100-240V– 1A

50/60 Hz 47 W

SERIAL 0

CONN

WIC

CONN

SEE MANUAL BEFORE INSTALLATION

LINK

ETHERNET 0 ACT

CONSOLE

AUX

Auxiliary

port (RJ-45)

Console

port (RJ-45)

Cisco 2621 Modular Access Router Security Policy

Cisco 2621 Modular Access Routers

Cisco 2600

SERIES

Figure