Cisco VG400 series Installation von

Blättern Sie online oder laden Sie pdf Installation von für Gateway Cisco VG400 series herunter. Cisco VG400 series 13 Seiten. Voice gateway
Auch für Cisco VG400 series: Hardware-Installationshandbuch (40 seiten), Software-Konfigurationshandbuch (22 seiten)

Seite drucken

Installing the Cisco VG400 Voice Gateway

The following chapter describes how to install and connect a Cisco VG400 Voice Gateway. The following

sections provide the installation procedures in detail:

Warning

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work

on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard

practices for preventing accidents. Use the statement number provided at the end of each warning to locate

its translation in the translated safety warnings that accompanied this device. Statement 1071

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement

1030

Warning

Read the installation instructions before using, installing or connecting the system to the power source.

Statement 1004

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations. Statement

1040

•

Safety Recommendations

Before you begin the installation, read the following safety warnings and recommendations. The following

information is included to alert you to safety recommendations and best practices when working with this

equipment.

Safety Recommendations, on page 1

Unpacking and Inspection, on page 3

Install the Cisco VG400 Voice Gateway, on page 3

Connect to Power Supply, on page 10

Power-On Procedure, on page 10

Installing the Cisco VG400 Voice Gateway