Cisco VG400 series 설치
{카테고리_이름} Cisco VG400 series에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco VG400 series 13 페이지. Voice gateway
Cisco VG400 series에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (40 페이지), 소프트웨어 구성 매뉴얼 (22 페이지)
페이지 인쇄
Installing the Cisco VG400 Voice Gateway
The following chapter describes how to install and connect a Cisco VG400 Voice Gateway. The following
sections provide the installation procedures in detail:
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device. Statement 1071
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement
1030
Warning
Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040
•
•
•
•
•
Safety Recommendations
Before you begin the installation, read the following safety warnings and recommendations. The following
information is included to alert you to safety recommendations and best practices when working with this
equipment.
Safety Recommendations, on page 1
Unpacking and Inspection, on page 3
Install the Cisco VG400 Voice Gateway, on page 3
Connect to Power Supply, on page 10
Power-On Procedure, on page 10
Installing the Cisco VG400 Voice Gateway
1