Epson LQ-570+ Service-Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Service-Handbuch für Drucker-Zubehör Epson LQ-570+ herunter. Epson LQ-570+ 49 Seiten. Sdx acd manager 5.2 printer setup
Auch für Epson LQ-570+: Produkt-Support-Bulletin (20 seiten), Produkt-Support-Bulletin (5 seiten), Produktinformation Handbuch (8 seiten), Handbuch installieren (1 seiten), Handbuch (12 seiten), Spezifikationen (2 seiten), Handbuch (8 seiten), Produkt-Support-Bulletin (16 seiten), Setup-Handbuch (14 seiten)

REV.-A

1.5 DIP SWITCHES AND JUMPER SETTING

This section describes the DIP switch selections and jumper setting for the LQ-570+ printer.

DIP Switch

1.5.1

Setting for

This printer is"equipped with two banks of DIP-SWITCHES and they are located on the control panel. The tablel -12

through 1-15 shows the available function settings of two DIP switches. (Note that the status of the DIP switches

is only read at power on or upon receipt of the /lNIT signal.)

No.

NOTE: : *1 is European version only. The switch of 1-6 is invalid

No.

mode

Table 1-12. Settinas

Description

International character set and PC

table selection

Character table selection

Graphic print direction

l-inch skip perforations

Table 1-13. Settings for DIP Switch 2 (SW2)

Description

Page length of continuous paper

Auto tear-off

Auto LF

DIP Switch 1 EW1)

for

OFF

See the table 1-14

Italic

IBM

OKB

8KB

OFF

See Table 1-15 below.

OFF

1-18

Factory

Setting

OFF

for another versions.

Factory

Setting

OFF