Epson LQ-570+ Servicehandleiding - Pagina 12

Blader online of download pdf Servicehandleiding voor {categorie_naam} Epson LQ-570+. Epson LQ-570+ 49 pagina's. Sdx acd manager 5.2 printer setup
Ook voor Epson LQ-570+: Product ondersteunings bulletin (20 pagina's), Product ondersteunings bulletin (5 pagina's), Handleiding productinformatie (8 pagina's), Installatiehandleiding (1 pagina's), Handmatig (12 pagina's), Specificaties (2 pagina's), Handmatig (8 pagina's), Product ondersteunings bulletin (16 pagina's), Installatiehandleiding (14 pagina's)

REV.-A

1.5 DIP SWITCHES AND JUMPER SETTING

This section describes the DIP switch selections and jumper setting for the LQ-570+ printer.

DIP Switch

1.5.1

Setting for

This printer is"equipped with two banks of DIP-SWITCHES and they are located on the control panel. The tablel -12

through 1-15 shows the available function settings of two DIP switches. (Note that the status of the DIP switches

is only read at power on or upon receipt of the /lNIT signal.)

No.

NOTE: : *1 is European version only. The switch of 1-6 is invalid

No.

mode

Table 1-12. Settinas

Description

International character set and PC

table selection

Character table selection

Graphic print direction

l-inch skip perforations

Table 1-13. Settings for DIP Switch 2 (SW2)

Description

Page length of continuous paper

Auto tear-off

Auto LF

DIP Switch 1 EW1)

for

OFF

See the table 1-14

Italic

IBM

OKB

8KB

OFF

See Table 1-15 below.

OFF

1-18

Factory

Setting

OFF

for another versions.

Factory

Setting

OFF