Argos VCB32A13S Gebrauchsanweisung - Seite 12

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Staubsauger Argos VCB32A13S herunter. Argos VCB32A13S 14 Seiten. Bagged cylinder vacuum cleaner

Seite drucken

Troubleshooting

Problem

There is an

accessory missing

The vacuum

cleaner does not

switch on

The vacuum

cleaner won't

pick up

Dust is escaping

from the

vacuum cleaner

Accessories

won't pick up

dust/debris

The blockage

indicator (if

applicable to

model) activates

Possible causes

1. A part(s) is missing from box

1. The unit is not plugged into a

mains socket

2. The power button on the unit has

not been depressed

3. The thermal motor cut out has

been activated

4. There is no electricity to the

power socket

1. The accessories are not

correctly fitted

2. There are blockages in the hose/

accessory

3. The dust bag is full

4. The filters are blocked/clogged

1. The filters/dust bag are not

fitted correctly

2. The filters are damaged

1. The wrong tool is fitted for the task

2. The tools are blocked

3. The filters are blocked

4. The dust bag is full

5. The hose/tubes are blocked

1. The filters/dust bag are blocked

2. The dust bag is full

3. The accessories/hose/tube

are blocked

Solutions

1. Check the 'PARTS' page of your instructions

1. Ensure the plug is firmly in the socket and

switched on

2. Depress the power switch on the unit

3. If the unit has cut out during use, disconnect

the unit from the wall socket, allow to cool

for one hour, clean the filters, empty bin and

check the hose/accessories for blockages

4. Seek expert help from a qualified electrician

1. Check hose/tools are correctly attached to

the machine/hose/tube; refer to 'ASSEMBLY/

OPERATION' section

2. Check the air paths of the hose/accessory are

not obstructed by blockages

3. Check dust bag and if necessary empty

4. Frequently cleaning filters will maintain

performance; see 'MAINTENANCE' section

1. See 'PARTS' and 'MAINTENANCE' sections

2. If the filters are damaged these will need to

be replaced

1. See 'PARTS' section

2. Check the air paths of the tools are not

obstructed by blockages

3. Frequently cleaning filters will maintain

performance; check 'MAINTENANCE' section

4. Check and empty the dust bag

5. Check the air paths of the hose/tubes are not

obstructed by blockages

1. Frequently cleaning filters will

maintain performance; check

'MAINTENANCE' section

2. Check and empty dust bag

3. Check the air paths of the accessories/hose/

tubes are not obstructed by blockages