Argos VCB32A13S 사용 설명서 - 페이지 12
{카테고리_이름} Argos VCB32A13S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos VCB32A13S 14 페이지. Bagged cylinder vacuum cleaner
Troubleshooting
Problem
There is an
accessory missing
The vacuum
cleaner does not
switch on
The vacuum
cleaner won't
pick up
Dust is escaping
from the
vacuum cleaner
Accessories
won't pick up
dust/debris
The blockage
indicator (if
applicable to
model) activates
11
Possible causes
1. A part(s) is missing from box
1. The unit is not plugged into a
mains socket
2. The power button on the unit has
not been depressed
3. The thermal motor cut out has
been activated
4. There is no electricity to the
power socket
1. The accessories are not
correctly fitted
2. There are blockages in the hose/
accessory
3. The dust bag is full
4. The filters are blocked/clogged
1. The filters/dust bag are not
fitted correctly
2. The filters are damaged
1. The wrong tool is fitted for the task
2. The tools are blocked
3. The filters are blocked
4. The dust bag is full
5. The hose/tubes are blocked
1. The filters/dust bag are blocked
2. The dust bag is full
3. The accessories/hose/tube
are blocked
Solutions
1. Check the 'PARTS' page of your instructions
1. Ensure the plug is firmly in the socket and
switched on
2. Depress the power switch on the unit
3. If the unit has cut out during use, disconnect
the unit from the wall socket, allow to cool
for one hour, clean the filters, empty bin and
check the hose/accessories for blockages
4. Seek expert help from a qualified electrician
1. Check hose/tools are correctly attached to
the machine/hose/tube; refer to 'ASSEMBLY/
OPERATION' section
2. Check the air paths of the hose/accessory are
not obstructed by blockages
3. Check dust bag and if necessary empty
4. Frequently cleaning filters will maintain
performance; see 'MAINTENANCE' section
1. See 'PARTS' and 'MAINTENANCE' sections
2. If the filters are damaged these will need to
be replaced
1. See 'PARTS' section
2. Check the air paths of the tools are not
obstructed by blockages
3. Frequently cleaning filters will maintain
performance; check 'MAINTENANCE' section
4. Check and empty the dust bag
5. Check the air paths of the hose/tubes are not
obstructed by blockages
1. Frequently cleaning filters will
maintain performance; check
'MAINTENANCE' section
2. Check and empty dust bag
3. Check the air paths of the accessories/hose/
tubes are not obstructed by blockages