Dill TPMS 1502 Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zubehör für Kraftfahrzeuge Dill TPMS 1502 herunter. Dill TPMS 1502 16 Seiten. Trailer kit
Seite drucken3.1.2 Plug the power cord into the display unit and plug the adapter into
auxiliary power supply.
An immediate audible
"Beep" sound will indicate the display unit is on. In 2 to 3
minutes, the display unit will show the tire pressures in yellow, along with four
blue tire position lights.
3.2 Transmitter Activation
Note: reference section 2 for transmitter installation.
The transmitters are shipped in "sleep" mode for battery conservation and will
be activated when the transmitter detects pressure in the tires or when the
vehicle speed exceeds 20mph.
The default cold inflation pressure setting of the display unit is 35PSI.
display unit is programmed to provide a low pressure warning when the
pressure is 20% lower (28PSI) and 30% higher (46PSI).
Cold inflation pressure can be set to your desired pressure and a warning will
alarm at 20% below and 30% above this pressure. For example, the driver will
be alerted at the following low and high pressures base on various set pressure:
PSI LEVEL
35
50
80
20% LOWER 30% HIGHER
28
46
40
52
64
104
8
The