Dill TPMS 1502 사용 설명서 - 페이지 8
{카테고리_이름} Dill TPMS 1502에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dill TPMS 1502 16 페이지. Trailer kit
페이지 인쇄3.1.2 Plug the power cord into the display unit and plug the adapter into
auxiliary power supply.
An immediate audible
"Beep" sound will indicate the display unit is on. In 2 to 3
minutes, the display unit will show the tire pressures in yellow, along with four
blue tire position lights.
3.2 Transmitter Activation
Note: reference section 2 for transmitter installation.
The transmitters are shipped in "sleep" mode for battery conservation and will
be activated when the transmitter detects pressure in the tires or when the
vehicle speed exceeds 20mph.
The default cold inflation pressure setting of the display unit is 35PSI.
display unit is programmed to provide a low pressure warning when the
pressure is 20% lower (28PSI) and 30% higher (46PSI).
Cold inflation pressure can be set to your desired pressure and a warning will
alarm at 20% below and 30% above this pressure. For example, the driver will
be alerted at the following low and high pressures base on various set pressure:
PSI LEVEL
35
50
80
20% LOWER 30% HIGHER
28
46
40
52
64
104
8
The