Argos Technologies EVac Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Laborausrüstung Argos Technologies EVac herunter. Argos Technologies EVac 20 Seiten.

Seite drucken
Operating EVac™

Preparing with level sensing

Preparing Vacuum Bottle

• Fit lid with quick couplings onto bottle. Ensure that lid is firmly attached.

Connecting Vacuum Bottle to Instrument

• Twist filter onto connection on EVac™. Writing on filter should point away from
device. Twist filter until resistance is felt, then twist an additional half turn to ensure
that an adequate seal is achieved.
• Connect filter with short tube to "BLUE" coupling on lid of vacuum bottle.
Connecting Vacuum Bottle to HandEvac™ Handheld Aspirator
• Connect long tube from HandEvac™ or other suction tool to "ORANGE" quick
coupling on lid of vacuum bottle.

Connecting the Level Detection Sensor Cable

• Connect sensor cable to socket marked "SENSOR" on bottle lid.
• Calibrate level detection according to section titled "Calibrating Level Detection"
(see page 13).
(continued)
10
Argos Technologies EVac™ — Operator's Manual