Argos Technologies EVac Посібник оператора - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник оператора для Лабораторне обладнання Argos Technologies EVac. Argos Technologies EVac 20 сторінок.

Operating EVac™

Preparing with level sensing

• Fit lid with quick couplings onto bottle. Ensure that lid is firmly attached.

• Twist filter onto connection on EVac™. Writing on filter should point away from

device. Twist filter until resistance is felt, then twist an additional half turn to ensure

that an adequate seal is achieved.

• Connect filter with short tube to "BLUE" coupling on lid of vacuum bottle.

Connecting Vacuum Bottle to HandEvac™ Handheld Aspirator

• Connect long tube from HandEvac™ or other suction tool to "ORANGE" quick

coupling on lid of vacuum bottle.

• Connect sensor cable to socket marked "SENSOR" on bottle lid.

• Calibrate level detection according to section titled "Calibrating Level Detection"

(see page 13).

(continued)

Argos Technologies EVac™ — Operator's Manual