Dill Retrofit TPMS Handbuch - Seite 8
Blättern Sie online oder laden Sie pdf Handbuch für Kontrollsysteme Dill Retrofit TPMS herunter. Dill Retrofit TPMS 16 Seiten.
Seite druckenThe display is preprogramed to provide a warning if the pressure drops 20% below or
30% above the cold inflation pressure. It will also give a high temperature warning if
the temperature exceeds 176°F. The high temperature warning point is not adjustable.
The system is shipped with the baseline (cold inflation) pressure set at 35 psi. At this
setting, the display will provide a low pressure warning at 28 psi and a high pressure
warning at 46 psi. You can set the baseline pressure (see Setting the Baseline (Cold
Inflation) pressure in Setting up the System on page 2) up to 144 psi and the display
will automatically provide a low pressure warning at 20% below and 30% above the
baseline setting.
Examples:
3.3 Normal Monitoring
3.3.1 Stationary State:
The transmitter will transmit tire pressure and temperature data to the
display at 2-minute intervals. As the data is received, the display will
refresh.
3.3.2 Moving State:
The inertial switch in the transmitter turns on when the speed ex-
ceeds 16mph.
The transmitter will transmit tire pressure and temperature data to the
display at 30-second intervals. As the data is received, the display
will refresh.
Cold Inflation
Pressure
45 psi
65 psi
90 psi
Low Pressure
Alarm
36 psi
52 psi
72 psi
7
High Pres-
sure Alarm
59 psi
85 psi
117 psi