Epson Apex 100 Produkt-Support-Bulletin - Seite 6

Blättern Sie online oder laden Sie pdf Produkt-Support-Bulletin für Desktop Epson Apex 100 herunter. Epson Apex 100 15 Seiten. Product support bulletin(s)
Auch für Epson Apex 100: Produkt-Support-Bulletin (45 seiten), Produkt-Support-Bulletin (21 seiten)

Epson Apex 100 Produkt-Support-Bulletin
Q. What kind of printer can I use with the APEX 100?
A. The APEX 100 includes an IBM PC - compatible parallel interface which is
used to connect any printer or plotter with a standard parallel interface.
An IBM PC- compatible parallel printer cable (not included) is required to
connect a printer to the computer.
Epson currently offers outstanding printers in the ActionPrinter line. The
T - series printers are 9 - pin printers with near letter quality print. The T-
1000 is an 80 column printer and the T750 is a 136 column printer. The
L- series printers are 24 - pin printers with superb letter quality print. The
L1000 is an 80 column printer and the L750 is a 136 column printer.
Q. What type of hard disk drive does Epson use with the APEX 100\20 and
what is the average disk access time.
A. Epson uses a 3.5" (5.25" frame), 20 MB, Miniscribe 8425, MFM hard disk
drive with an average access time of 69ms. The average power draw is
10 watts.
Q. Can a hard disk drive be added to the APEX 100 model?
A. Yes, you can either replace the lower floppy disk drive with an internal
half height hard disk drive (5.25" frame) and IBM PC/XT- compatible
controller or install a hard disk card.
hardcard is that you keep both floppy drives which comes in handy for
disk copying.
the hard disk drive requires a separate hard disk controller card while the
hardcard' plugs into an I/O expansion slot. We recommend a hard disk
which draws 14 watts or less.
Another thing which you must consider, if you decide on using a hardcard
is the size (width) of the hardcard.
one slot, usually 1 - 1/2 slots, which means they will fit in one slot if the
board next to them is a half length board.
hardcards are very thin so they will fit regardless of what type of board is
in the adjacent slot. A less expensive 1 - 1/2 slot hardcard which we have
tested in the APEX 100 is the Standard Brand hardcard. This hardcard is
available in both 20MB (Flashcard - 20) and 30MB (Flashcard - 30) models.
We recommend using a Western Digital (Model WD1002A- WX1) hard disk
controller card, as this model has been tested with the APEX 100.
In either case you will use an I/O expansion slot because
PSB No: S-0097
Page: 2 of 8
One advantage to installing a
Most hardcards take up more than
The Plus Development