- ページ 6

デスクトップ Epson Apex 100のPDF 製品サポート速報をオンラインで閲覧またはダウンロードできます。Epson Apex 100 15 ページ。 Product support bulletin(s)
Epson Apex 100 にも：製品サポート速報 (45 ページ), 製品サポート速報 (21 ページ)

ページを印刷する

Q. What kind of printer can I use with the APEX 100?

A. The APEX 100 includes an IBM PC - compatible parallel interface which is

used to connect any printer or plotter with a standard parallel interface.

An IBM PC- compatible parallel printer cable (not included) is required to

connect a printer to the computer.

Epson currently offers outstanding printers in the ActionPrinter line. The

T - series printers are 9 - pin printers with near letter quality print. The T-

1000 is an 80 column printer and the T750 is a 136 column printer. The

L- series printers are 24 - pin printers with superb letter quality print. The

L1000 is an 80 column printer and the L750 is a 136 column printer.

Q. What type of hard disk drive does Epson use with the APEX 100\20 and

what is the average disk access time.

A. Epson uses a 3.5" (5.25" frame), 20 MB, Miniscribe 8425, MFM hard disk

drive with an average access time of 69ms. The average power draw is

10 watts.

Q. Can a hard disk drive be added to the APEX 100 model?

A. Yes, you can either replace the lower floppy disk drive with an internal

half height hard disk drive (5.25" frame) and IBM PC/XT- compatible

controller or install a hard disk card.

hardcard is that you keep both floppy drives which comes in handy for

disk copying.

the hard disk drive requires a separate hard disk controller card while the

hardcard' plugs into an I/O expansion slot. We recommend a hard disk

which draws 14 watts or less.

Another thing which you must consider, if you decide on using a hardcard

is the size (width) of the hardcard.

one slot, usually 1 - 1/2 slots, which means they will fit in one slot if the

board next to them is a half length board.

hardcards are very thin so they will fit regardless of what type of board is

in the adjacent slot. A less expensive 1 - 1/2 slot hardcard which we have

tested in the APEX 100 is the Standard Brand hardcard. This hardcard is

available in both 20MB (Flashcard - 20) and 30MB (Flashcard - 30) models.

We recommend using a Western Digital (Model WD1002A- WX1) hard disk

controller card, as this model has been tested with the APEX 100.

In either case you will use an I/O expansion slot because

PSB No: S-0097

Page: 2 of 8

One advantage to installing a

Most hardcards take up more than

The Plus Development