Epson Equity IIe Produkt-Support-Bulletin - Seite 11
Blättern Sie online oder laden Sie pdf Produkt-Support-Bulletin für Desktop Epson Equity IIe herunter. Epson Equity IIe 19 Seiten. Product support bulletin(s)
Auch für Epson Equity IIe: Produkt-Support-Bulletin (19 seiten), Produktinformation Handbuch (8 seiten), Produkt-Support-Bulletin (45 seiten)
Q12.
Does the Epson Hard Disk Interface require an expansion slot?
A.
No. The Epson Hard Disk Interface interconnects the system board with
an AT- interface type hard disk through a dedicated connector.
Q14.
Can the floppy disk interface be disabled?
A.
No. The floppy disk interface is integrated on the system board and
there are no jumpers to disable it.
Q15.
Can the Epson Hard Disk Controller be disabled or its address
changed?
A.
Yes. There are five jumpers on the LYNX- HI board for altering its
function, J1 through J5:
Jumper 1:
Jumper 2:
Jumper 3:
Jumper 4: Hard Disk Controller I/O port address
Jumper 5: Hard Disk Controller Enable/Disable
Q16.
Can the Equity Ile use other hard disk drives and controllers?
A.
Yes, the Lynx- Hi board can be disabled and other SCSI, ESDI, MFM
type controllers and drives can be used. Other AT- interface drives can
be connected to the Lynx - Hi board as well.
FLOPPY DRIVES:
Q17. What types of floppy disk drives will work on the Equity Ile?
A.
The Equity Ile will support 5.25", 1.2Mb (standard) and 360Kb half-
height floppy disk drives. To provide industry wide compatibility, the
support for both 1.44Mb and 720Kb, 3.5" floppy disk drives is also
provided.
Reserved
Reserved
Reserved
A: Primary (1F0H - 177H, 3F6H, 3F7H)
B: Secondary (170H - 177H, 376H, 377H)
A: Enable
B: Disable
PSB No: S-0105
Page 5 of 7