Epson Equity IIe Bulletin d'information sur les produits - Page 11

Parcourez en ligne ou téléchargez le pdf Bulletin d'information sur les produits pour {nom_de_la_catégorie} Epson Equity IIe. Epson Equity IIe 19 pages. Product support bulletin(s)
Également pour Epson Equity IIe : Bulletin d'information sur les produits (19 pages), Manuel d'information sur les produits (8 pages), Bulletin d'information sur les produits (45 pages)

Q12.

Does the Epson Hard Disk Interface require an expansion slot?

No. The Epson Hard Disk Interface interconnects the system board with

an AT- interface type hard disk through a dedicated connector.

Q14.

Can the floppy disk interface be disabled?

No. The floppy disk interface is integrated on the system board and

there are no jumpers to disable it.

Q15.

Can the Epson Hard Disk Controller be disabled or its address

changed?

Yes. There are five jumpers on the LYNX- HI board for altering its

function, J1 through J5:

Jumper 1:

Jumper 2:

Jumper 3:

Jumper 4: Hard Disk Controller I/O port address

Jumper 5: Hard Disk Controller Enable/Disable

Q16.

Can the Equity Ile use other hard disk drives and controllers?

Yes, the Lynx- Hi board can be disabled and other SCSI, ESDI, MFM

type controllers and drives can be used. Other AT- interface drives can

be connected to the Lynx - Hi board as well.

FLOPPY DRIVES:

Q17. What types of floppy disk drives will work on the Equity Ile?

The Equity Ile will support 5.25", 1.2Mb (standard) and 360Kb half-

height floppy disk drives. To provide industry wide compatibility, the

support for both 1.44Mb and 720Kb, 3.5" floppy disk drives is also

provided.

Reserved

A: Primary (1F0H - 177H, 3F6H, 3F7H)

B: Secondary (170H - 177H, 376H, 377H)

A: Enable

B: Disable

PSB No: S-0105

Page 5 of 7