Epson Equity LT-286e Produkt-Support-Bulletin - Seite 6
Blättern Sie online oder laden Sie pdf Produkt-Support-Bulletin für Desktop Epson Equity LT-286e herunter. Epson Equity LT-286e 15 Seiten. Proper method for running benchmark and diagnostics programs using the manzana driveport third party memory boards
Auch für Epson Equity LT-286e: Produktinformation Handbuch (7 seiten)
Seite drucken
Subject:
Equity LT-286e 2400 Baud Modem Information
Date:
3/05/90
Page:
1 of 1
The 2400 baud internal modem for the Equity LT-286e has been released.
Below please find some related information:
Equity LT-286e 2400 Baud Modem
Data Rates
Compatibility
Operational modes
Configuration and
phone number storage
Data format
Character length
Diagnostics
Equalization
Telephone interface
Transmit level
Power source
In order to run a self-test, perform the following steps:
From terminal mode in the telecommunications program used, do the following.
Type ATZ and Enter. Modem responds with OK.
Type AT10 and Enter. Modem returns ID code.
Type AT11 and Enter. Modem returns ROM checksum.
Type AT12 and Enter. Modem tests internal memory, returning OK if functional;
To exit self-test mode, type ATZ and Enter.
Note that there is no speaker, so all dialing operations are performed silently.
Monitor the progress of the call by watching the display for messages such as
CONNECT, NO CARRIER, BUSY, etc.
Product Support Bulletin
300/1200/2400 bps
Bell 103J and 212A
CCITT V.22 and V.22bis
Auto dial, auto answer, auto speed selection with
automatic fall - back mode
Nonvolatile memory
Asynchronous or synchronous, character serial
10 bits
Local analog loopback, local digital loopback, local
data test pattern, remote digital loopback, remote
data test pattern
Auto - adaptive (2400 bps)
RJ - 11, 2-wire, full duplex
-10 dbm
Supplied from bus
ERROR result code if not.
PSB No:
Originator: MWT'
MSRP $299.00
A808211