Epson Equity LT-286e 제품 지원 게시판 - 페이지 6
{카테고리_이름} Epson Equity LT-286e에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Equity LT-286e 15 페이지. Proper method for running benchmark and diagnostics programs using the manzana driveport third party memory boards
Epson Equity LT-286e에 대해서도 마찬가지입니다: 제품 정보 매뉴얼 (7 페이지)
페이지 인쇄
Subject:
Equity LT-286e 2400 Baud Modem Information
Date:
3/05/90
Page:
1 of 1
The 2400 baud internal modem for the Equity LT-286e has been released.
Below please find some related information:
Equity LT-286e 2400 Baud Modem
Data Rates
Compatibility
Operational modes
Configuration and
phone number storage
Data format
Character length
Diagnostics
Equalization
Telephone interface
Transmit level
Power source
In order to run a self-test, perform the following steps:
From terminal mode in the telecommunications program used, do the following.
Type ATZ and Enter. Modem responds with OK.
Type AT10 and Enter. Modem returns ID code.
Type AT11 and Enter. Modem returns ROM checksum.
Type AT12 and Enter. Modem tests internal memory, returning OK if functional;
To exit self-test mode, type ATZ and Enter.
Note that there is no speaker, so all dialing operations are performed silently.
Monitor the progress of the call by watching the display for messages such as
CONNECT, NO CARRIER, BUSY, etc.
Product Support Bulletin
300/1200/2400 bps
Bell 103J and 212A
CCITT V.22 and V.22bis
Auto dial, auto answer, auto speed selection with
automatic fall - back mode
Nonvolatile memory
Asynchronous or synchronous, character serial
10 bits
Local analog loopback, local digital loopback, local
data test pattern, remote digital loopback, remote
data test pattern
Auto - adaptive (2400 bps)
RJ - 11, 2-wire, full duplex
-10 dbm
Supplied from bus
ERROR result code if not.
PSB No:
Originator: MWT'
MSRP $299.00
A808211