Motorola D1111 Handbuch "Erste Schritte - Seite 24

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Schnurloses Telefon Motorola D1111 herunter. Motorola D1111 30 Seiten. D1110 series digital cordless phone with answer machine
Auch für Motorola D1111: Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (43 seiten)

Seite drucken

You hear the busy tone when you press

• Make sure the handset is in range of the base.

• Another handset registered to your D1110 base may be on

the line.

Answer machine does not record any messages

• The memory may be full. Play and delete old messages, see

page 18.

Answer machine messages have the wrong date

and time

• Have you set the date and time? See page 14.

No Caller Display number/name displayed

• Have you subscribed to a Caller Display service from your

network provider? See page 15.

• The caller may have withheld their number.

• An exact name/number match was not found in your

directory. Check that you have stored the full STD dialling

code.

Cannot register a handset to a base

• You can register a total of 5 handsets to your D1110 base

and you can register your D1110 handset to up to 4 bases.

Check that you have not exceeded the limits.

• Check that you have entered the correct PIN number

(default PIN 0000).

• Check that you are at least one metre away from other

electrical equipment to avoid interference when registering.

Handset display shows

NOT REG

• Please refer to page 23 of the user guide to re-register your

handset to the base.

Base unit does not ring

• Have you connected the telephone line correctly?

• Is the base ringer set to off?

• You may have a faulty line or socket. Try using another

socket or line.

Buzzing noise on my phone or on other electrical

equipment nearby

• Sometimes your D1110 can interfere with other electrical

equipment if it is placed too close. It is recommended that

you place your D1110 at least one metre away from

electrical appliances or metal obstructions to avoid any risk

of interference.

Possible problems with text

messaging

Text messages cannot be sent and screen

displays

Message Sending Failed

• The base station power supply or telephone line cord might

not be properly connected. Check that the base station

power supply is plugged into the mains socket and switched

on and that the telephone is plugged into the telephone wall

socket.

• There might be a fault on the line. Check your telephone line

is working properly.

• You might have deleted the server number in error. See

page 21 for instructions on how to enter the number.

Cannot send text

• The send and receive service center numbers are pre-

programmed. If you need to change them, please refer to

"Add or change Service Centre numbers" on page 21 or

contact your service provider.

Cannot receive text

• For some network operator, you will not be able to receive

text messages until you have first sent a message. The first

message sent registers you with the text service.

• More than one text messaging product is plugged into the

line. Remove other products.

• Check service centre number is correct.

• Ensure you have subscribed to a Caller Display service and

that it is active. You can check this by noting if your phone

displays your caller's number when you receive an incoming

call.

• If you are using personal user areas please ensure you have

given people your user area number and that they are

entering it to the end of your telephone number when

sending you a text message.

You keep hearing an error beep

• You have pressed the wrong button in a sequence. Check

the prompts in the display or refer to instructions in this user

guide.

16. General information

IMPORTANT

This equipment is not designed for making emergency

telephone calls when the power fails. Alternative arrangements

should be made for access to emergency services.

This product is intended for connection to analogue public

switched telephone networks and private switchboards in the

United Kingdom.

Important safety instructions

Follow these safety precautions when using your phone to

reduce the risk of fire, electric shock, and injury to persons or

property:

1. Keep all slits and openings of the phone unblocked. Do not

set the phone on a heating register or over a radiator.

Ensure that proper ventilation is provided at the installation

site.

2. Do not use while wet or while standing in water.

3. Do not use this product near water (for example, near a

bath tub, kitchen sink, or swimming pool).

4. Do not allow anything to rest on the power cord. Place the

power cord so that it will not be walked on.

5. Never insert objects of any kind into the product vents as

that may result in fire or electric shock.

6. Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

7. Do not disassemble this product. If service or repair work is

required, contact the customer service helpline found in this

user's Guide.

8. Do not overload wall outlets and extension cords.

9. Avoid using during an electrical storm. Use a surge

protector to protect the equipment.

10. Do not use this phone to report a gas leak, especially if you

are in the vicinity of the gas line.

CAUTION

To reduce the risk of fire, use only the supplied power adaptor.

Unplug this cordless phone immediately from an

outlet if:

• The power cord or plug is damaged or frayed.

• Liquid has been spilled on the product.

• The product has been exposed to rain or water. Do not

retrieve the handset or base until after you have unplugged

General information