Motorola D1111 Manuel de démarrage - Page 24

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage pour {nom_de_la_catégorie} Motorola D1111. Motorola D1111 30 pages. D1110 series digital cordless phone with answer machine
Également pour Motorola D1111 : Manuel de démarrage rapide (2 pages), Manuel de l'utilisateur (43 pages)

Motorola D1111 Manuel de démarrage
You hear the busy tone when you press
• Make sure the handset is in range of the base.
• Another handset registered to your D1110 base may be on
the line.
Answer machine does not record any messages
• The memory may be full. Play and delete old messages, see
page 18.
Answer machine messages have the wrong date
and time
• Have you set the date and time? See page 14.
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your
network provider? See page 15.
• The caller may have withheld their number.
• An exact name/number match was not found in your
directory. Check that you have stored the full STD dialling
code.
Cannot register a handset to a base
• You can register a total of 5 handsets to your D1110 base
and you can register your D1110 handset to up to 4 bases.
Check that you have not exceeded the limits.
• Check that you have entered the correct PIN number
(default PIN 0000).
• Check that you are at least one metre away from other
electrical equipment to avoid interference when registering.
Handset display shows
NOT REG
• Please refer to page 23 of the user guide to re-register your
handset to the base.
Base unit does not ring
• Have you connected the telephone line correctly?
• Is the base ringer set to off?
• You may have a faulty line or socket. Try using another
socket or line.
Buzzing noise on my phone or on other electrical
equipment nearby
• Sometimes your D1110 can interfere with other electrical
equipment if it is placed too close. It is recommended that
you place your D1110 at least one metre away from
electrical appliances or metal obstructions to avoid any risk
of interference.
24
<
Possible problems with text
.
messaging
Text messages cannot be sent and screen
displays
Message Sending Failed
• The base station power supply or telephone line cord might
not be properly connected. Check that the base station
power supply is plugged into the mains socket and switched
on and that the telephone is plugged into the telephone wall
socket.
• There might be a fault on the line. Check your telephone line
is working properly.
• You might have deleted the server number in error. See
page 21 for instructions on how to enter the number.
Cannot send text
• The send and receive service center numbers are pre-
programmed. If you need to change them, please refer to
"Add or change Service Centre numbers" on page 21 or
contact your service provider.
Cannot receive text
• For some network operator, you will not be able to receive
text messages until you have first sent a message. The first
message sent registers you with the text service.
• More than one text messaging product is plugged into the
line. Remove other products.
• Check service centre number is correct.
• Ensure you have subscribed to a Caller Display service and
that it is active. You can check this by noting if your phone
displays your caller's number when you receive an incoming
call.
• If you are using personal user areas please ensure you have
given people your user area number and that they are
entering it to the end of your telephone number when
sending you a text message.
You keep hearing an error beep
• You have pressed the wrong button in a sequence. Check
the prompts in the display or refer to instructions in this user
guide.

16. General information

IMPORTANT
This equipment is not designed for making emergency
telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
This product is intended for connection to analogue public
switched telephone networks and private switchboards in the
United Kingdom.

Important safety instructions

Follow these safety precautions when using your phone to
reduce the risk of fire, electric shock, and injury to persons or
property:
1. Keep all slits and openings of the phone unblocked. Do not
set the phone on a heating register or over a radiator.
Ensure that proper ventilation is provided at the installation
site.
2. Do not use while wet or while standing in water.
3. Do not use this product near water (for example, near a
bath tub, kitchen sink, or swimming pool).
4. Do not allow anything to rest on the power cord. Place the
power cord so that it will not be walked on.
5. Never insert objects of any kind into the product vents as
that may result in fire or electric shock.
6. Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
7. Do not disassemble this product. If service or repair work is
required, contact the customer service helpline found in this
user's Guide.
8. Do not overload wall outlets and extension cords.
9. Avoid using during an electrical storm. Use a surge
protector to protect the equipment.
10. Do not use this phone to report a gas leak, especially if you
are in the vicinity of the gas line.
CAUTION
To reduce the risk of fire, use only the supplied power adaptor.
Unplug this cordless phone immediately from an
outlet if:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled on the product.
• The product has been exposed to rain or water. Do not
retrieve the handset or base until after you have unplugged
General information
EN