Motorola PRO5100 Handbuch - Seite 26

Blättern Sie online oder laden Sie pdf Handbuch für Radio Motorola PRO5100 herunter. Motorola PRO5100 49 Seiten. Motorola professional radio pro series

Seite drucken

TALKBACK

The Talkback feature allows you to respond to a

transmission while scanning. If a transmission on

a channel is detected while scanning, the radio

will stop on that channel for a preprogrammed

period of time. During this "hangtime" you may

respond by pressing the PTT.

Note: If transmission stops/ceases or if the PTT

is not pressed for a preprogrammed

duration, the radio will continue scanning.

Also, the LED scan indicator stops

blinking while the radio is in hangtime.

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted

calls or noise (a "nuisance" channel), use the

Scan button to temporarily delete the channel

from the scan list.

Note: You cannot delete a priority channel (see

page 26) or the last remaining channel in

a scan list.

1 While the radio is on the nuisance channel, hold

down the Scan button until you hear a tone.

2 Release the Scan button. The nuisance

channel is deleted.

English

Restoring a Channel to the Scan List

To restore a previously deleted channel to the

scan list, restart the scan operation or turn your

radio off and on again.

EDITING A SCAN LIST

Note: The enhanced keypad microphone is

required to operate this feature.

A scan list is a group of up to 16 channels. Each

channel can have a scan list assigned to it. The

same channel can be included in several scan

lists, and the same scan list can be assigned to

several Channel Selector positions. For

example:

Position 2

When you edit a scan list, you can either add,

delete, or prioritize channels. The K symbol will

appear on the display while you are in edit mode.

Note: Your radio cannot receive any calls while

you are editing a scan list.

Position 14