Motorola PRO5100 매뉴얼 - 페이지 26

{카테고리_이름} Motorola PRO5100에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola PRO5100 49 페이지. Motorola professional radio pro series

TALKBACK

The Talkback feature allows you to respond to a

transmission while scanning. If a transmission on

a channel is detected while scanning, the radio

will stop on that channel for a preprogrammed

period of time. During this "hangtime" you may

respond by pressing the PTT.

Note: If transmission stops/ceases or if the PTT

is not pressed for a preprogrammed

duration, the radio will continue scanning.

Also, the LED scan indicator stops

blinking while the radio is in hangtime.

If a channel continually generates unwanted

calls or noise (a "nuisance" channel), use the

Scan button to temporarily delete the channel

from the scan list.

Note: You cannot delete a priority channel (see

page 26) or the last remaining channel in

a scan list.

1 While the radio is on the nuisance channel, hold

down the Scan button until you hear a tone.

2 Release the Scan button. The nuisance

channel is deleted.

English

To restore a previously deleted channel to the

scan list, restart the scan operation or turn your

radio off and on again.

Note: The enhanced keypad microphone is

required to operate this feature.

A scan list is a group of up to 16 channels. Each

channel can have a scan list assigned to it. The

same channel can be included in several scan

lists, and the same scan list can be assigned to

several Channel Selector positions. For

example:

Position 2

When you edit a scan list, you can either add,

delete, or prioritize channels. The K symbol will

appear on the display while you are in edit mode.

Note: Your radio cannot receive any calls while

you are editing a scan list.

Position 14