Epson PowerLite 1915 Betriebshandbuch - Seite 37

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Software Epson PowerLite 1915 herunter. Epson PowerLite 1915 47 Seiten. Air filter and vent maintenance
Auch für Epson PowerLite 1915: Handbuch zur Schnelleinrichtung (4 seiten), Benutzerhandbuch (1 seiten), Broschüre & Specs (4 seiten), Anweisungen aktualisieren (4 seiten), Konformitätserklärung (4 seiten), Teileliste (1 seiten), Benutzerhandbuch (25 seiten), Handbuch aktualisieren (8 seiten), Benutzerhandbuch (25 seiten), Wartungshandbuch (3 seiten)

Seite drucken
Epson PowerLite 1915 Betriebshandbuch
Using the control functions
2 Date
Shows the current day in a red box.
Days for which timer settings have been made are shown in bold.
Click
or
to switch to the calendar for the previous or next
month.
3 Timers
Shows a list of the timer settings.
The line colors in the Timers list have the following meanings:
Current day's timer setting
When some of the projectors in the group have timer
setting enabled and others have it disabled for the
current day's timer setting
When the current day's timer setting is a disabled setting
Timer setting for a day other than the current day
4 Delete
Lets you delete timer settings that have been selected
from the timer list.
5 Close
Closes the Timer Settings window.
6 Edit
Lets you change the timer settings that have been
selected from the timer list. If a group has been selected
for status checking, the settings cannot be changed.
7 Add
Registers new timer settings. s "Procedures for new
timer settings"
8 Enabled/disabled
Switches the timer settings that have been selected from
the timer list between enabled and disabled.
p.37

Procedures for new timer settings

Procedure
A
Click "Add" on the Timer Settings window. The following
window is displayed and the new timer settings are applied.
For Operation, you can select operations such as turning the power
on and off and switching the input sources, similar to the control
buttons on the main window. If you set up input source switching,
the projector's power will turn on at the timer start time even if it is
not on at the time. Because of this, it is not necessary to make two
separate timer settings for turning the power on and switching the
input source.
B
After completing the timer settings, click "OK".
The timer settings that have been made will be registered and they
can be checked in the displayed timer list.
q
You can enable and disable all of the timer settings that have been
registered. Select Timer - Enable or Disable from the Tool menu.
37