Epson PowerLite 1915 Manuale operativo - Pagina 37

Sfoglia online o scarica il pdf Manuale operativo per Software Epson PowerLite 1915. Epson PowerLite 1915 47. Air filter and vent maintenance
Anche per Epson PowerLite 1915: Manuale di configurazione rapida (4 pagine), Manuale d'uso (1 pagine), Opuscolo e specifiche (4 pagine), Istruzioni per l'aggiornamento (4 pagine), Dichiarazione di conformità (4 pagine), Elenco delle parti (1 pagine), Manuale d'uso (25 pagine), Manuale di aggiornamento (8 pagine), Manuale d'uso (25 pagine), Manuale di manutenzione (3 pagine)

Stampa la pagina

Using the control functions

2 Date

Shows the current day in a red box.

Days for which timer settings have been made are shown in bold.

Click

to switch to the calendar for the previous or next

month.

3 Timers

Shows a list of the timer settings.

The line colors in the Timers list have the following meanings:

Current day's timer setting

When some of the projectors in the group have timer

setting enabled and others have it disabled for the

current day's timer setting

When the current day's timer setting is a disabled setting

Timer setting for a day other than the current day

4 Delete

Lets you delete timer settings that have been selected

from the timer list.

5 Close

Closes the Timer Settings window.

6 Edit

Lets you change the timer settings that have been

selected from the timer list. If a group has been selected

for status checking, the settings cannot be changed.

7 Add

Registers new timer settings. s "Procedures for new

timer settings"

8 Enabled/disabled

Switches the timer settings that have been selected from

the timer list between enabled and disabled.

p.37

Procedures for new timer settings

Procedure

Click "Add" on the Timer Settings window. The following

window is displayed and the new timer settings are applied.

For Operation, you can select operations such as turning the power

on and off and switching the input sources, similar to the control

buttons on the main window. If you set up input source switching,

the projector's power will turn on at the timer start time even if it is

not on at the time. Because of this, it is not necessary to make two

separate timer settings for turning the power on and switching the

input source.

After completing the timer settings, click "OK".

The timer settings that have been made will be registered and they

can be checked in the displayed timer list.

You can enable and disable all of the timer settings that have been

registered. Select Timer - Enable or Disable from the Tool menu.