Epson PowerLite 4100 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Software Epson PowerLite 4100 herunter. Epson PowerLite 4100 8 Seiten. Warranty statement
Auch für Epson PowerLite 4100: Handbuch "Erste Schritte (9 seiten), Betriebshandbuch (47 seiten), Kurzreferenz (7 seiten), Konformitätserklärung (4 seiten), Installationshandbuch (4 seiten)

Epson PowerLite 4100 / 4200W / 4300

Use the

pointer button to move the pointer on the screen.

Press the

button once to left-click, or twice to double-click.

Enter

Press the

button to right-click.

Esc

To drag-and-drop, hold down the

pointer button to drag the object. When it's where you want

it, release the

button.

Enter

Operating Two or More Projectors With

If you're using more than one projector, you can control all the

projectors—or just selected ones—by using the projector ID system.

To operate a projector, set the remote control's ID to match that of

the projector. Or you can control all the projectors at once by setting

the remote control's ID to zero.

Setting the Projector ID

The projector's default ID is set to O . This lets it respond to

commands from any remote control. To change the ID, follow these

steps:

1. Press the

button on the remote control. You see the

projector's menu screen.

2. Select

, press

Extended

again.

Enter

button. Then use the

Enter

, select

Enter

Projector ID

, then press

INSTALLATION HANDBOOK

Remote Control Information